- 最高输入850 V (DC＋AC峰值)的隔离输入
- 通道多达16个
- 32 bit 扩展逻辑输入(任选项)
- 每通道64 M字大存储器(任选项)
- 采样速率高达10MS/s
- (带12 bit分辨率高速模块)
- 3.2 GB内置硬盘(任选项)
- 重放功能
- 10.4吋宽视角彩色薄膜TFT显示屏
- 增加的同PC机连通
- 支持16通道和全屏幕的设置菜单
技术指标
水平方向
- 最大记录长度:
1 M字(每通道200 k字�标准)
8 M字(每通道2 M字�/ M1选项)
32 M字(每通道8 M字�/ M2选项)
64 M字(每通道16 M字�/ M3选项)
收集方式:
- 常规, 包络, Box平均, 历史存储, 顺序储存, 滚动
触发器
- 模式: 自动/ 自动-电平/ 常规/ 计时
- 类型: 边沿触发/ 事件/ 图形触发/A→B(n)/ A延迟B/ A边沿/脉宽触发/B＞计时/ B＜计时/B超时/ 窗口触发
一般规格
- 外型尺寸: 355(宽)×260(高)×305(深) mm(手柄和突出部除外)
- 重量:约12.4公斤(包括16通道高速隔离模块)
- 额定电源电压:
自动在100至120 V AC和200至240 V AC间切换
订货信息
·Accessories(optional)
| Product |
Model/PartNo. |
Description |
Order Quantity |
Adapter connector
|
366971 |
RS-232-Cadapter connector |
1 |
| Printer cable |
B9946YY |
Exclusively for centronics interface
(for)DL 708E) |
1
|
| Conversion adapter |
366972 |
BNC(plug)-RCA(jack)conversion |
1 |
| Conversion adapter |
366928 |
BNC(jack)-RCA(plug)conversion |
1 |
| Soft carryingcase |
700911 |
For DL 708E only |
1 |
| Protective front panel cover |
700911 |
ForDL 708E only;transparent |
1 |
| Protective front panel cover |
B9946EA |
For DL708E only;opaque |
1 |
| Soft case |
B9946EA |
Forstoring accessories |
1 |
| Protective full-panel cover |
B9949GA |
For DL716 only(opaque) |
1 |
| Protective full-panelcover |
B9949GA |
For DL716 only(transparent) |
1 |
| High-speed logic proble(*1) |
700986 |
For32-bit extercled logic input |
1 |
| High-speed logic proble(*2) |
700987 |
For 32-bit extercled logicinput |
1 |
*1 Includes connector leads B9879PX and B9879PX and B9879KX(one each).
*2 Measurement leads 366961 or 758917 and either 758922 or 758929 or 758929 must be purchased separately to use this probe in measurements.
·Accessories for High-Speed Isolation Module and High-Speed Module(optional)
| Product |
Model |
Description |
Order Quantity |
| Conversionadapter*1 |
366921 |
Conversion adapter(BNC-banana female)) |
1 |
| Adapter*1 |
366923 |
T-typefor BNC |
1 |
| BNC cable*1 |
366926 |
BNC-alligator clip cable |
1 |
| BNC cable*1 |
366924 |
BNC cable(BNC-BNC;1meter) |
1 |
| BNCcable*1 |
366*25 |
BNC cable(BNC-BNC;2 meter) |
1 |
| BNC adapter |
758924 |
BNC(mate)4mm socket(+,-)adapter |
1 |
*1 These adapters and cables are not insulated and should therefore be used for low-voltage measurements(42V or less).
·Probe Model
| Product |
Model |
Description |
Order Quantity |
| Special isolation probe |
700929 |
For701855 |
1 |
| 10:1/1:1switching probe |
700998 |
Works with 701856 |
1 |
·Accesories for High-resolution,High-voltatge Isolation Module and High-resolution Isolation Moduke(optional)
·For high-voltage measurements(42 V or highter)
| Product |
Model |
Description |
Order Quantity |
Measurementlead
Alligator clip adapter
Alligator clip adapter |
758917
758922
758929 |
Two leads per set;adapters aresold separately.
(Use with 758922 or 758929.)
For 758917 measurement lead(twoper set).
Rated voltage:300V
For 758917 measurement lead (two per set).
Rated voltage:1000V |
1
1
1 |
·For low-voltage measurement(42V or lower)
| Product |
Model |
Description |
Order Quantity |
Measurement
Adapter
Adapter |
366961
366922
751512 |
Cable with alligator clip adapter
Banana(male)-BNC
Safety connector-bindingpost adapter |
1
1
1 |
·Accsesories for Logic Input Module
| Product |
Model |
Description |
Order Quantity |
| High-speedlogic probe(*1) |
700986 |
For DL716(main nuit)and 701870 |
1 |
| High-speed logicprobe(*2) |
700987 |
For DL716(main unit)and 701870 |
1 |
*1 Includes connector leads B9879PX and B9879PX and B9879KX(one each).
*2 Measurement leads 366961 or 758917 and either 758922 or 758929 must be purchased separately to use this probe in measurements.
·Measurement lead for 700986 logic probes
| Product |
PartNo. |
Description |
Order Quantity |
| Connector lead |
B9879PX |
Alligator cliplead(for eight bits) |
1 |
| Connector lead |
B9879KX |
IC clip lead(for eight bits) |
1 |
·Measurement lead for 700987 logic probes
·For high-voltage measurement (42V or higher)
| Product |
PartNo. |
Description |
Order Quantity |
| Measurement lead |
758917 |
Adaptoris optiona(for 1 bit measurement)
(used with 758922 or 758929 |
1 |
| Alligatorclip adapter |
758922 |
Rated voltage:300V |
1 |
| Alligatorclip adapter |
758929 |
Rated voltage:1000V |
1 |
·For low-voltage measurements(42 V or lower)
| Product |
PartNo. |
Description |
Order Quantity |
| Measurement lead |
366961 |
Cable withalligator clip adapter(for one bit) |
1 |
·Strain Module(701880)Accessories(optional)
| Product |
PartNo. |
Description |
Order Quantity |
Bridge head
Bridge head
Connector adapter cable
Cable connector |
700932
700933
700940
A1002JC
|
Bridge resistance:120Ω Cable length:5m
Bridge resistance:350ΩCable length:5m
NDIS-MIL C 26482 Compatible(Bendix)connector adapter cable(length:1.5meters)
NDIS connector for strain module
|
1
1
1
1
|
·Spares(for Main Unit)
| Product |
PartNo. |
Description |
Order Quantity |
| Printer roll paper |
B9580NX |
30 meters per roll |
5 rolls |
| See the DL Series Accessory Catalog(Bulletin7001-63E)for information on other accessories. |
