| Synthesizer |
|
| Spectralpurity |
|
| PHASENOISE(25-kHz offset) |
|
| f<500MHz |
<-121dBc/Hz |
| f≧500MHz |
<-115dBc/Hz |
| RESIDUALFM |
|
| f<500MHz |
4Hz(rms,CCITT-weighted) |
| f≧500MHz |
8Hz(rms,CCITT-weighted) |
| NONHARMONICSPURIOUS SIGNALS>500Hz off carrier |
<-55dBc |
| HARMONICS |
|
| Level<-15.1dBm |
<-25dBc |
| Level≧-15.1dBm |
<-20dBc |
| RESIDUALAM |
<0.02%(rms,CCITT-weighted) |
| 10-MHzreference oscillator |
| WARMUP TIME |
<3min for frequency error
<5*10-7
<10minfor frequency error10-7 |
| FREQUENCYERROR |
<1*10-7(T=5 to 45℃) |
| AGING |
<5-8/month |
| OUTPUTLEVEL |
approx.0.4V(into 50Ω) |
| SYNCHRONIZATION |
10MHz,V>150mVrms(into200Ω) |
| RF Generator |
|
| Carrierfrequency |
|
| FREQUENCY RANGE |
0.4to 999.9999MHz |
| RESOLUTION |
|
| f<500MHz |
50Hz |
| f≧500MHz |
100Hz |
| FREQUENCYERROR |
as reference oscillator |
| Outputlevel |
|
| RF SOCKET |
-142to -7dBm(max.-13dBm with AM) |
| RFDIRECT SOCKET |
-122 to +13dBm(max.+7dB with AM) |
| resolution |
0.1dB |
| LEVELERROR INTO 50Ω |
|
| RFsocket |
|
| Level≧-130dBm |
<1.3dB |
| Level>-15.0dBm |
<2dB |
| RFDIRECT socket |
|
| Level≧-110dBm |
<1.6dB |
| Level>+5.0dBm |
<2.5dB |
| VSWR(50Ω)RFSOCKET |
<1.1 |
| EMFsetting range with out interruption(not with AM) |
0 to 15dBusable to 20dB |
| Additional level error |
0.1dBper dB |
| Modulation |
|
| FM(AC-coupled) |
|
| FREQUENCYDEVIATION |
0 to 40kHz |
| MODULATIONFREQUENCY(int.and ext.) |
30Hz to 30kHz |
| RESOLUTION |
10Hz |
| SETTINGERROR |
|
| fmod=300Hzto 3kHz |
<5%+3digits |
| fmod=30Hzto 20kHz |
<10%+3digits |
| DISTORTION(dev.<10kHz) |
|
| fmod=300Hzto 3kHz |
<1% |
| EXT.MOD.INPUT |
20kHzFM=0.707 Vrms into 600Ω |
| FM(external DC-coupled) |
|
| FREQUENCYDEVIATION |
0 to 5kHz |
| MODULATIONFREQUENCY |
0 to 30kHz |
| CENTRE-FREQUENCYERROR |
<100Hz +frequency error of reference oscillator |
| фM |
|
| PHASEDEVIATION |
0 to 6rad(fmod*rad≧20kHz) |
| RESOLUTION |
0.01rad |
| MODULATIONFREQUENCY |
200Hz to 6kHz |
| SETTINGERROR |
|
| fmod=300Hzto 3kHz |
<1% |
| EXT.MOD.INPUT |
20RAD фM=0.707Vrms into 600Ω |
| AM |
|
| MODULATIONDEPTH |
m=0 to 99.9% |
| RESOLUTION |
0.1% |
| MODULATIONFREQUENCY |
30Hz to 10kHz |
| SETTINGERROR FOR M≧90% |
|
| fmod=30Hzto 10kHz |
<0.1*m+1digit |
| DISTORTIONfor m<50% |
|
| fmod=300Hzto 3kHz |
<2% |
| EXT.MOD.INPUT |
50%AM=0.707Vrms into 600Ω |
| RF Analyzer |
|
| Frequencymeasurement |
|
| FREQUENCYRANGE |
2 to 999.9999MHz |
| RESOLUTION |
10Hz |
| ADMISSIBLEINPUT LEVEL |
|
| onRF socket |
0.1 mW to 125W |
| MEASURINGACCURACY |
as reference oscillator±10Hz |
| Frequency-offsetmeasurement |
| FREQUENCY RANGE |
2to 999.9999MHz |
| MEASURINGRANGE |
0 to ±99.99kHz |
| RESOLUTION |
|
| f<10kHz |
1Hz |
| f<≧10kHz |
10Hz |
| ADMISSIBLEINPUT LEVEL |
|
| on RFsocket |
2μW to 125W |
| onRF DIRECT socket |
1mV to 1V(measuring range:0 to±15kHz) |
| MEASURING ACCURACY |
as referenceoscillatior+3Hz(+1digit for offset≧10kHz) |
| RF-powermeasurement,RF-socket(broadband) |
| FREQUENCY RANGE |
2to 999.99MHz |
| MEASURINGRANGE |
1mW to 125W(average) |
| RESOLUTION |
|
| P<1W |
1mW |
| P<10W |
10mW |
| P<≧10W |
100mW |
| MEASURINGACCURACY(w/o modulation) |
| P>200mW |
<10%+1digit
(f=20to 500MHz)
<12%+1digit
(f=6 to 999.9999MHz) |
| RF-powermeasurement(bandwidth approx.3MHz) |
| FREQUENCYRANGE |
2 to 999.9999MHz |
| MEASURINGRANGE |
|
| RFsocket |
-45 to +37dBm |
| RFDIRECT socket |
-65 to +17dBm |
| MEASURINGACCURACY |
3dB |
| RESOLUTION |
0.1dBm |
| Modulationmeasurement |
|
| FMmeasurement,RF socket(broadband) |
| FREQUENCYRANGE |
2 to 999.9999MHz |
| INPUTLEVEL |
0.1mW to 125W |
| MEASURINGRANGE |
0 to 25kHz |
| RESOLUTION |
10Hz |
| MEASURINGACCURACY(dev.<<10kHz) |
| fmod=300Hzto 3kHz |
5%±1digit±peak residual FM |
| fmod=100Hzto 10kHz |
10%±1digit±peak residual FM |
| DEMODULATIONDISTORTION |
|
| fmod=300Hzto 3kHz |
<0.5% |
| PEAKRESIDUAL FM |
<50Hz or <10Hz/100MHz |
| FMmeasurement,RF DIRECT socket(narrowband) |
| FREQUENCYRANGE |
2 to 999.9999MHz |
| INPUTLEVEL |
-50 to -20dBm |
| MEASURINGRANGE |
0 to 10kHz(fmod*dev.<10kHz) |
| MODULATIONFREQUENCY |
fmod=0 to 6kHz |
| RESOLUTION |
10Hz |
| SENSITIVITY |
betterthan 2mV(3kHz FM dev.,10dB SINAD,CCITT-weigthed) |
| IFBANDWIDTH |
30kHz |
| фMmeasurement,RF socket(broadband) |
| FREQUENCY RANGE |
2to 999.9999MHz |
| INPUT LEVEL |
0.1mWto 125W |
| MEASURING RANGE |
0 to6rad(FM dev.<50kHz) |
| RESOLUTION |
0.01rad |
| MEASURINGACCURACY |
|
| fmod=300Hzto 3kHz |
6%±2digits |
| fmod=200Hzto 10kHz |
10%±2digits |
| DEMODULATIONDISTORTION |
|
| fmod=300Hzto 3kHz |
<0.5% |
| фMmeasurement,RF DIRECT socket(narrowband) |
| FREQUENCYRANGE |
2 to 999.9999MHz |
| INPUTLEVEL |
-50 to -20dBm |
| MEASURINGRANGE |
0 to 3 rad(fmod*фM dev.<15kH) |
| MODULATIONFREQUENCY |
200Hz to 6kHz |
| SENSITIVITY |
betterthan 2mV(3rad фMdev,10dB SINAD CCITT-weighted) |
| IFBANDWIDTH |
30kHz |
| AMmeasurement |
|
| FREQUENCYRANGE |
2 to 999.9999MHz |
| MEASURINGRANGE |
0 to 100% |
| INPUTLEVEL |
|
| RF socket |
1mWto 125W |
| RF DIRECT socket |
0.01mWto 0.5W |
| RESOLUTION |
0.1% |
| MEASURINGACCURACY(m<≧10% |
| fmod=Hzto 10kHz |
10%±2digits |
| DEMODULATIONDISTORTION |
|
| fmod=300Hzto 3kHz |
<1% |
| MODULATIONFREQUENCY |
DC to 10kHz |
| Spurious-modulationmeasurement |
| INPUTLEVEL |
|
| RF socket |
1mW to 125W |
| RFDIRECT socket |
20mW to 1V |
| MEASURINGRANGE |
0 to -40dB(CCITT-weighted)referred to 3kHz FM dev.)3radфMdev.or 30%AM |
| MEASURINGACCURACY |
1dB |
| AFGenerator |
|
| Modulationgenerator GEN A |
| FREQUENCY RANGE |
30Hzto 30kHz |
| RESOLUTION |
|
| f<3kHz |
0.1Hz |
| f≧3kHz |
1Hz |
| FREQUENCYERROR |
<0.01% |
| LEVELRANGE(EMF) |
0.1mVrms to 5Vrms |
| RESOLUTION |
|
| EMF≦5V |
10mV |
| EMF≦1V |
1mV |
| EMF≦0.1V |
0.1mV |
| EMF≦10mV |
10μV |
| LEVELERROR |
|
| f=100Hz to3kHz |
<3% |
| f=50Hzto 15kHz |
<10% |
| DISTORTION |
|
| f=30Hzto 3kHz |
<0.5% |
| f>3kHz |
<1% |
| OUTPUTIMPEDANCE(balanced) |
|
| f=300Hzto 3kHz |
<10Ω |
| f=30Hzto 30kHz |
<40Ω |
| OUTPUT IMPEDADNCE(unbalanced) |
600Ω±5% |
| PERMISSIBLELOAD IMPEDANCE |
>200Ω |
| AFAnalyzer |
|
| AFvoltmeter |
|
| FREQUENCYRANGE |
30Hz to 30kHz or to CCITT P53A |
| MEASURINGRANGE |
0.1mV to 20V |
| RESOLUTION |
|
| Level<0.1V |
0.1mV |
| Level<1V |
1mV |
| Level<10V |
10mV |
| Level<20V |
100mV |
| MEASURINGACCURACY |
|
| f=300Hzto 3kHz |
3% |
| f=50Hzto 15kHz |
6% |
| SOURCEIMPEDANCE |
>100kΩ or 600Ω±3% |
| INPUTCAPACITANCE |
20pF |
| AFcounter |
|
| Frequencyrange |
30Hz to 30kHz |
| INPUTLEVEL |
5mV to 20V |
| RESOLUTION |
|
| f<300Hz |
0.1Hz |
| f<10kHz |
1Hz |
| f≧10kHz |
10Hz |
| MEASURINGACCURACY |
0.01%±1digit |
| Distortionmeter |
|
| INPUTLEVEL |
0.1 to 20V |
| TEST FREQUENCY |
1kHz±5Hz |
| MEASURINGRANGE |
0 to 99% |
| RESOLUTION |
0.1% |
| MEASURINGACCURACY |
|
| d=1 to90% |
5% of emas.value±3 digits |
| SINADmeter |
|
| INPUT LEVEL |
0.1 to 20V |
| MEASURINGRANGE |
1 to 46dB |
| RESOLUTION |
|
| SINAD<30dB |
0.1dB |
| SINAD<≧30dB |
0.5dB |
| MEASURINGACCURACY for SINAD <30dB |
0.8dB±1digit |
| Scope& Analyzer |
|
| Spectrumanalyzer |
|
| FREQUENCYRANGE |
|
| FREQUENCYACCURACY better than 2% of sweep with INPUT-LEVEL RANGE for measuring accuracy3dB in the frequency range 0.5*fc≦f≦2*fc |
| RF socket |
-70to +47dBm |
| RF DIRECTsocket |
-90 to +13dBm |
| SWEETWIDTH |
200kHz,2MHz,10MHz |
| SWEEPTIME |
|
| Wweep width2MHz and 10MHz |
approx.500ms |
| Sweepwidth 200kHz |
approx.2s |
| EVEALUATIONBANDWIDTH |
|
| Sweepwidth 2MHz and 10MHz |
30kHz |
| Wweepwidth 200kHz |
6kHz |
| INHERNTNOISE on RF DIRECT socket |
| Sweep width 2MHz and 10MHz |
-95dBm |
| Sweepwidth 200kHz |
-105dBm |
| Oscilloscope |
|
| INPUTSEXTERNAL |
Zi=1MΩ/40pF(AC/DC) |
| INPUTSINTERNAL |
RX mod,TX demod,duplex demod,AF voltmeter,residualdistortion |
| FREQUENCYRANGE |
DC(3Hz) to 20kHz |
| LEVELERROR |
<10% +0.2div |
| GRATING |
6*10div |
| HORIZORTALDERLECTION |
2μs/div to 500ms/div |
| VERTICALDEFLECTION |
2mV/div to 10V/div or
160Hz/divto 8kHz/div(FM)
0.16rad/div to 8rad/div (фM)
0.8%/div to 40%/div(AM) |
| TRIGGER |
±slopeselectable trigger leve |
| OPERATINGMODES |
auto,norm,one-shot,freeze,tyne measurement(max.reslution2.5μ) |
| Selective-call encoder and decoder |
| Standardtone sequences |
XVEI 1,CCIR,VDEW,ZVEI 2,EEA,NATEL,EIA,EURO,CCITT |
| User-definedtone sequences |
|
| Sequenceof up to 30 tones can be stored by user.Also double tones and underlying continuoustone (with GEN B option) |
| Encoder |
|
| Operatingmodes |
|
SINGLE-TONESEQUENCE(max.30 tones)
DOUBLE-TONE SEQUENCE(with GEN B option)
(single-toneand double-tone sequences can be transmitted continuously)
ACKNOWLEDGEMENTCALL(max.30 tones)
from response time of <100ms acknowledgement call onlypossible with optional duplex FM/фM stage
FREQUENCY ERROR |
| Decoder |
|
Decodingof each tone of tone sequencse (max.30tones)
Continuous decoding can be set |
| General |
|
| Dimensionsand weight |
|
| H*W*D |
230mm*375mm*486mm |
| WEIGHT |
approx.18.5kg |
| Powersupply AC |
94 to 132Vor 187 to 264V(47 to 450Hz) |
| Pmax |
approx.110W(incl.options) |
| Environment |
|
| OPERATING TEMPERATURE |
5to 45℃ |
| STORAGE TEMPERATURE |
-40 to +70℃ |
| RELATIVEHUMIDITY |
max.90% |
| Mechanicalstrength (to DIN 40046) |
| SHOCK |
25g |
| VIBRATION |
5to 10Hz for 10mm amplitued
10 to 60Hz,2g constant |
| EMCconformity |
EN 55022:19995,class B
EN 60801:1994,part 2test level 1
ENV 50140:1995,test level 2
IEC1000-4-4:1995,test level 3 |
| Safety |
EN61010:1995,part 1 |
| IEEE-bus interface |
|
| STANDARD |
IEEE-488 |
| CONNECTOR |
24-way |
| FUNCTIONS |
AH1,SH1,L2,T1,SR1,RL1,DC1 |
| Frequencyextension |
|
| Thefollowing specifications apply to the FEX option |
| RFGenerator |
|
| Carrierfrequency |
|
| FREQUENCYRANGE |
1.0 to 2.3GHz |
| RESOLUTION |
1kHz |
| Outputlevel |
|
| RFsocket |
-142 to -20dBm |
| RFDIRECT SOCKET |
-122 to 0 dBm |
| LEVELERROR into 50Ω(1.0 to 2.0GHz) |
| RF socket |
1.5dB(overrange-110 to -20dBm) |
| VSWR(50)RFsocket |
<1.2 |
